Roof Space
Conversion: Turning
an Empty Attic Into
a Room You Use

A roof space conversion turns a box-filled attic into a proper room. It is the most common form of loft conversion in London. Once the attic becomes a bedroom or office, it must meet the rules for a habitable room.

That means a real stair, safe structure, fire protection and insulation. This guide explains what makes an attic suitable and how different roofs are converted.

It also covers how to look after the finished roofspace.

Whether you call it a loft, an attic or a roofspace, the same rules apply.

What matters is how the finished room will be used.

A study, a bedroom and a playroom all count as habitable rooms.

A store room that you visit now and then does not.

The difference matters for safety, insurance and any future sale.

Curious whether your attic could become a room? Our attic team answers 020 8050 1825; photos are welcome by email too.

Roof Space Conversions and What Makes an Attic Suitable

Roof space conversions start with two questions: is there enough height, and can a stair reach it?

Headroom, pitch and floor area

A clear 2.2 metres or so under the ridge board is what most designers hope to find. A steep pitch leaves more of the floor usable. The minimum loft height post explains how to measure.

Readings at several points give a fair picture of an older roof.

A torch, a tape and a helper are all you need for a first look.

Never step between joists, as the ceiling below will not hold your weight.

Note where the water tank, pipes and cables run.

These often need moving as part of the conversion.

Below that, a dormer or other roof change is usually needed.

A stair that can reach it

The stair needs space on the landing below and headroom over the flight.

It usually rises above the existing stair to keep the layout simple.

Sometimes a small part of a bedroom below is used to make room.

The stair is designed to feel like part of the original house.

Matching balusters and handrails help it blend in.

A rooflight over the stairwell keeps it bright.

The new stair also needs a handrail and balustrade to the regulations.

Roof note: check the stair position before anything else.

Roof Space Under Cut Roofs, Trusses and Hips

How a roof space is converted depends on how the roof was built.

Cut roofs with purlins and struts

Most older London houses have hand-built roofs with purlins and struts, which can be replaced with steels.

They often give a good, open space once converted.

Chimney breasts in the attic may be removed and the stack supported.

Our engineers design the support before any brickwork comes out.

Where a stack is shared, both houses are kept safe during the work.

Removing a breast often frees useful floor space.

The stack above is then carried on steel brackets or beams.

Factory-made trusses in post-war homes

Trussed rafters have diagonal timbers that need steels and new rafters before removal.

You will find trusses in many homes built after the war.

They were designed as a complete frame, so no timber can be cut without a plan.

The conversion replaces that frame with steels and new rafters.

The new structure is shown clearly on the engineer’s drawings.

Building Control checks the calculations before work starts.

Inspectors then visit when the steels are in place.

Hipped ends on semis and detached homes

A hipped end can be rebuilt as a brick gable. See our semi-detached guide.

A garden-side dormer is then added for full standing height.

Matching brick and tiles keep the new gable in keeping with the house.

The hip-to-gable route often doubles the usable floor.

It suits many 1930s semis across outer London.

On a terrace, a rear dormer alone usually gives the space needed.

Our terraced guide covers that layout in detail.

Attic Space That Stays Storage Versus a Habitable Room

Not every attic space needs a full conversion.

Two generic lofts in sectionTwo generic lofts in section

Boarding for storage only

Boarding over joists for light storage is a simple job, but it does not create a room.

Heavy loads should not be stored on ceiling joists.

Proper loft boarding systems raise the floor above the insulation.

That keeps the insulation working and the ceiling below intact.

Boarding for storage does not need Building Regulations approval.

But it should still leave the insulation uncompressed.

Raised boarding keeps the loft warm and the ceiling sound.

The line between storage and living space

Once the space is used as a bedroom or office, it needs Building Regulations approval.

Using an attic as a bedroom without approval can cause problems when you sell.

Building Control checks the structure, stair, fire safety and insulation.

A completion certificate confirms the room is safe and legal.

Keep it with the house deeds for any future sale.

Buyers’ solicitors will usually ask to see it.

New Joists, Floor and Structure Hidden Above the Ceiling

The structure changes once the attic becomes a room.

Joists sized for a bedroom, not a ceiling

Existing joists carry a ceiling, not furniture and people. New joists are sized by our structural engineers.

New joists usually sit beside or above the old ones.

They carry the floor without loading the ceiling below.

Insulation between the new joists also cuts noise to the rooms below.

The floor is designed to feel solid underfoot.

Its depth is kept as shallow as possible to save headroom.

A slimmer floor build-up leaves more headroom for the room above.

Steels where struts come out

Steel beams take over the load when struts or truss webs are removed.

They usually bear on the party walls or the main walls.

On terraces and semis, that usually means party wall notices.

Notices are arranged on your behalf, two months before the wall work.

Neighbours have 14 days to respond.

Clear drawings help them agree quickly.

A generic house in section with a loft being convertedA generic house in section with a loft being converted

Stairs, Fire Safety and Insulation the Rules Require

The rules for a habitable room apply in full.

A generic two-storey house in section with a loft converted into a third storeyA generic two-storey house in section with a loft converted into a third storey

A proper stair, not a ladder

Any attic used as a habitable room needs a stair. Headroom over it is normally 2 metres; a government appeal decision confirms lofts may drop to 1.9 metres mid-flight.

Alternating-tread or compact stairs suit very few situations.

A conventional flight, sometimes winding at the top, is the usual answer.

Getting the stair right early saves redesigning later.

It usually decides where the bedroom and bathroom can go.

We test several stair positions before choosing one.

Escape route, fire doors and alarms

Fire safety means a protected staircase enclosure, fire-rated doors and linked mains alarms.

Fire safety is designed for the whole house, not just the attic.

An escape window may also be needed, depending on the layout.

Our architect designs the fire strategy as part of the drawings.

Building Control checks it before and during the build.

Smoke alarms are tested before handover.

Insulation and ventilation

The roof is insulated to current standards and ventilated to prevent condensation.

That keeps the room warm in winter and cooler in summer.

Breathable membranes and vents stop moisture building up.

Rooflights and dormer windows are sealed against draughts.

Good insulation also helps keep the room cool on hot days.

Blinds on rooflights help further in summer.

Looking After a Converted Roofspace Over the Years

A converted roofspace needs little maintenance.

Checking for leaks after storms

Look for damp patches after heavy rain.

Early checks stop small problems becoming big ones.

Gutters and flashings are worth a look each autumn.

Rooflights may need new seals after many years.

A quick look each year keeps the room in good condition.

Keeping vents clear

Keep vents and rooflight seals clean.

Good ventilation also prevents condensation on cold surfaces.

Opening rooflights for a few minutes each day helps too.

Extractor fans in any loft bathroom should be kept running as designed.

Clean the fan grille now and then to keep it working well.

Six Steps That Take an Attic Through to Sign-Off

Each attic goes through six steps with our own team.

Measurements, sketches and a scheme

  • A surveyor records the attic’s height, pitch, timbers and the landing below.
  • Layout sketches show where the stair, the room and the storage could go.
  • The favoured layout is drawn to scale by our ARB-registered architect.

Consents, construction and certificate

  • Engineers calculate the new joists and any steels.
  • The council receives a certificate request or application, and neighbours sharing a wall are notified.
  • The attic is converted by our crew and certified by Building Control.

Attic work has been our focus for 25 years across London, with over 250 rooms delivered and 98 in every 100 handed over on time.

A written timetable follows the survey, listing the main cost factors: roof type, steelwork, stair and finishes.

Credentials for every roof space job: NICEIC electrics, Gas Safe heating, TrustMark via NAPIT and FMB membership. We hold public liability insurance, and new structural work has ten years of written protection.

Converting an attic usually takes 8 to 12 weeks on site, as our timescales guide shows. Our wider service sits on the London Lofts front page.

Roof Spaces, Attics and Rules: Questions Answered

Loft ladders: allowed for a converted room?

No. A loft ladder is fine for a storage attic, but a converted bedroom or office needs a proper stair that meets the regulations.

A roofspace conversion and planning: is permission needed?

Usually not. Most roof space conversions use permitted development, confirmed by a certificate. Protected streets and Article 4 areas need a planning application instead.

Is attic space under a trussed roof usable?

Often yes. Steel beams carry the roof so the diagonal truss timbers can come out. Headroom is checked first, because trussed roofs are often lower.

Roof spaces on a terrace: how do party walls affect them?

Notices are usually needed, because new steels often bear on the shared walls. We arrange them on your behalf; see our

Unsure what your attic could become? The team on 020 8050 1825 can talk it through, or send a message.

Loft bedroom with two rooflights and fitted wardrobes

Book a No-Cost Check of What Sits Under Your Tiles

A free visit looks at your roof space and tells you plainly whether it can become a room. Ring 020 8050 1825 for a time, or request it online.